Ductwork

3”-24” made from galvanized steel 14 GA, SS is 16 GA. Over 24 inches made from 3/16” flat bar steel. Supplied with two halves bolted together.

The Nordfab Quick-Fit® Sleeve, formerly known as the Adjustable Nipple, is used to quickly provide variable length adjustments in ducting lines of QF Pipe. QF Sleeve seams are laser welded, preventing leakage. Quick-Fit ducting components are...

The Nordfab Quick-Fit® Sleeve, formerly known as the Adjustable Nipple, is used to quickly provide variable length adjustments in ducting lines of QF Pipe. QF Sleeve seams are laser welded, preventing leakage. Quick-Fit ducting components are...

Nordfab QF® Machine Adapters allow easy connection of Quick-Fit (QF) ductwork to machines requiring dust or fume removal. Ends are QF (rolled edge) to NOFIT (plain edge). If expanded, specify desired ID or OD of NOFIT end. Expanded must be within...

Nordfab QF® Machine Adapters allow easy connection of Quick-Fit (QF) ductwork to machines requiring dust or fume removal. Ends are QF (rolled edge) to NOFIT (plain edge). If expanded, specify desired ID or OD of NOFIT end. Expanded must be within...

3”-24” made from galvanized steel 14 GA, SS is 16 GA. Over 24 inches made from 3/16” flat bar steel. Supplied with two halves bolted together.

3”-24” made from galvanized steel 14 GA, SS is 16 GA. Over 24 inches made from 3/16” flat bar steel. Supplied with two halves bolted together.

14 Gauge End Plates are used to cap-off an unused ducting port. They are ideal for future expansion or when a machine has been moved. End Plates are designed for use with flanged ductwork. For ductwork with QF ends, 14 Gauge End Caps are available...

14 Gauge End Plates are used to cap-off an unused ducting port. They are ideal for future expansion or when a machine has been moved. End Plates are designed for use with flanged ductwork. For ductwork with QF ends, 14 Gauge End Caps are available...

Tested by MET Laboratories to hold, without failure, up to 170lbs for 9” ducting and up to 850lbs for 20” ducting. For strut channel mounting (strut not included). Nut and bolt included.

Nordfab's Quick-Fit® Clamp with ePTFE Seal provides quick and easy connections for Nordfab’s Quick-Fit Duct ductwork. Quick-Fit Ducting is ideal for dust collection and process ventilation systems, saving time and money on installation,...

Nordfab QF® Hose Adapters provide connection from Quick-Fit (QF) ductwork to flex hose. Hose end is beaded to help retain hose and the hose clamp or bridge hose clamp. For use with Nordfab flexible rubber hose or Static Dissipative Urethane Hose...