Ductwork

Tested by MET Laboratories to hold, without failure, up to 170lbs for 9” ducting and up to 850lbs for 20” ducting. For strut channel mounting (strut not included). Nut and bolt included.

Tested by MET Laboratories to hold, without failure, up to 170lbs for 9” ducting and up to 850lbs for 20” ducting. For strut channel mounting (strut not included). Nut and bolt included.

For use with Nordfab Angle Flanges or Angle Flange Adapters. Gasket dimensions match Angle Flange dimensions. Red silicone material optimal for higher temperature applications. Silicone temperature range -65° to 450°. One gasket should be used...

3”-24” made from galvanized steel 14 GA, SS is 16 GA. Over 24 inches made from 3/16” flat bar steel. Supplied with two halves bolted together.

3”-24” made from galvanized steel 14 GA, SS is 16 GA. Over 24 inches made from 3/16” flat bar steel. Supplied with two halves bolted together.

Tested by MET Laboratories to hold, without failure, up to 170lbs for 9” ducting and up to 850lbs for 20” ducting. For strut channel mounting (strut not included). Nut and bolt included.

Tested by MET Laboratories to hold, without failure, up to 170lbs for 9” ducting and up to 850lbs for 20” ducting. For strut channel mounting (strut not included). Nut and bolt included.

Nordfab's Quick-Fit® Clamp with ePTFE Seal provides quick and easy connections for Nordfab’s Quick-Fit Duct ductwork. Quick-Fit Ducting is ideal for dust collection and process ventilation systems, saving time and money on installation,...

Nordfab's Quick-Fit® Clamp provides quick and easy connections for Nordfab’s Quick-Fit Duct ductwork. Quick-Fit Ducting is ideal for dust collection and process ventilation systems, saving time and money on installation, future relocations,...

Nordfab's Quick-Fit® Clamp with Silicone Seal provides quick and easy connections for Nordfab’s Quick-Fit Duct ductwork. Quick-Fit Ducting is ideal for dust collection and process ventilation systems, saving time and money on installation,...

QF® End Caps connect easily with the QF clamp and are used to cap-off an unused ducting port. They are ideal for future expansion or when a machine has been moved. Available in Galvanized and 304SS (as shown below) or optional 316SS or carbon steel...

QF® End Caps connect easily with the QF clamp and are used to cap-off an unused ducting port. They are ideal for future expansion or when a machine has been moved. Available in Galvanized and 304SS (as shown below) or optional 316SS or carbon steel...