Ductwork

Nordfab Angle Flanges are industry standard sizes and hole patterns. Quick-Fit ducting components are adaptable to your existing ductwork. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer...

Nordfab Angle Flanges are industry standard sizes and hole patterns. Quick-Fit ducting components are adaptable to your existing ductwork. Quick-Fit has been used in a wide variety of applications, wherever dust collection or fine particulate transfer...

Nordfab’s QF® Bell Mouth Hood has a flared end to increase the capture ratio of air, dust, and smoke as well as increase laminar air flow. The QF (rolled edge) end allows quick connection to Nordfab duct fittings. Available in Galvanized and...

Used to adjust airflow to balance system by introducing ambient air. Available in Galvanized and 304SS or optional 316SS or carbon steel Available with flanged ends in diameters up to 24", and other various end types Optional gauges 20, 18 and...

Nordfab QF Duct Elbows, also referred to as bends, allow airflow direction change in a line of duct. Available in 90°, 60°, 45°, and 30°. Available in Galvanized and 304SS or optional 316SS or carbon steel Available with flanged ends...

Nordfab QF Duct Elbows, also referred to as bends, allow airflow direction change in a line of duct. Available in 90°, 60°, 45°, and 30°. Available in Galvanized and 304SS or optional 316SS or carbon steel Available with flanged ends...

Nordfab QF® Machine Adapters allow easy connection of Quick-Fit (QF) ductwork to machines requiring dust or fume removal. Ends are QF (rolled edge) to NOFIT (plain edge). If expanded, specify desired ID or OD of NOFIT end. Expanded must be within...

Nordfab QF® Machine Adapters allow easy connection of Quick-Fit (QF) ductwork to machines requiring dust or fume removal. Ends are QF (rolled edge) to NOFIT (plain edge). If expanded, specify desired ID or OD of NOFIT end. Expanded must be within...

Ducting elbows, sometimes referred to as bends, allow airflow direction change in a straight run of ductwork. Nordfab’s QF® Long Radius elbows are available in 90°, 60°, 45°, and 30°, in galvanized or stainless steel, (specify...

Tested by MET Laboratories to hold, without failure, up to 170lbs for 9” and up to 850lbs for 20″. Cannot be used as a Clamp connection. Clearance hole 7/16".

For use with Nordfab Angle Flanges or Angle Flange Adapters. Gasket dimensions match Angle Flange dimensions. Red silicone material optimal for higher temperature applications. Silicone temperature range -65° to 450°. One gasket should be used...

14 Gauge End Plates are used to cap-off an unused ducting port. They are ideal for future expansion or when a machine has been moved. End Plates are designed for use with flanged ductwork. For ductwork with QF ends, 14 Gauge End Caps are available...