Ductwork

Nordfab Reducers provide easy transition from one size of duct pipe or fitting to a smaller size. When ordering reducers, specify dimensions of both A and B ends. Rotational Angle Flanges retained vanstone lip is standard. If welded flanges required,...

3”-24” made from galvanized steel 14 GA, SS is 16 GA. Over 24 inches made from 3/16” flat bar steel. Supplied with two halves bolted together.

Nordfab QF® Machine Adapters allow easy connection of Quick-Fit (QF) ductwork to machines requiring dust or fume removal. Ends are QF (rolled edge) to NOFIT (plain edge). If expanded, specify desired ID or OD of NOFIT end. Expanded must be within...

Nordfab QF® Machine Adapters allow easy connection of Quick-Fit (QF) ductwork to machines requiring dust or fume removal. Ends are QF (rolled edge) to NOFIT (plain edge). If expanded, specify desired ID or OD of NOFIT end. Expanded must be within...

Nordfab Reducers provide easy transition from one size of duct pipe or fitting to a smaller size. When ordering reducers, specify dimensions of both A and B ends. Rotational Angle Flanges retained vanstone lip is standard. If welded flanges required,...

For use with Nordfab Angle Flanges or Angle Flange Adapters. Gasket dimensions match Angle Flange dimensions. Standard gasket is constructed of black nitrile, 60 durometer, a conductive material. Red silicone material optional for higher temperature...

Nordfab QF Duct Elbows, also referred to as bends, allow airflow direction change in a line of duct. Available in 90°, 60°, 45°, and 30°. Available in Galvanized and 304SS or optional 316SS or carbon steel Available with flanged ends...

Nordfab QF Duct Elbows, also referred to as bends, allow airflow direction change in a line of duct. Available in 90°, 60°, 45°, and 30°. Available in Galvanized and 304SS or optional 316SS or carbon steel Available with flanged ends...

End caps with bird screen connect easily with the QF® Clamp and are used in situations where openings are needed to allow air to enter or exit a system. The bird screen keeps foreign objects from entering the system. Birdscreen constructed of...

End caps with bird screen connect easily with the QF® Clamp and are used in situations where openings are needed to allow air to enter or exit a system. The bird screen keeps foreign objects from entering the system. Birdscreen constructed of...

Tested by MET Laboratories to hold, without failure, up to 170lbs for 9” ducting and up to 850lbs for 20” ducting. For strut channel mounting (strut not included). Nut and bolt included.

Tested by MET Laboratories to hold, without failure, up to 170lbs for 9” ducting and up to 850lbs for 20” ducting. For strut channel mounting (strut not included). Nut and bolt included.